# About the 3D Design category

**URL:** https://metastudio.org/t/about-the-3d-design-category/3582
**Category:** 3D Design
**Created:** [April 11, 2020, 9:36pm UTC](https://metastudio.org/t/about-the-3d-design-category/3582 "2020-04-11T21:36:18Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![ravi312](https://metastudio.org/user_avatar/metastudio.org/ravi312/32/5552_2.png) [@ravi312](https://metastudio.org/u/ravi312)
#### Post date: [April 11, 2020, 9:36pm UTC](https://metastudio.org/t/about-the-3d-design-category/3582/1 "2020-04-11T21:36:18Z")

</div>

Hi all!

3D printing is quite popular among the makers’ community. As such, learning software that can help you design models that you can later print is very central to digital fabrication skills.  
This section has a collection of project challenges of varying difficulty which are fun to attempt at the same time it will help you hone your design/fabrication skills!

We are focussing on using the following tools ( software )

> ### OpenSCAD - 3D parametric modeler ( FLOSS )
> 
> [https://www.openscad.org/](https://www.openscad.org/)

> ### FreeCAD - 3D parametric modeler (FLOSS )
> 
> [https://www.freecadweb.org/](https://www.freecadweb.org/)

> ### Any other F/LOSS alternative - Blender etc
> 
> [Free and open-source software - Wikipedia](https://en.wikipedia.org/wiki/Free_and_open-source_software)

Happy Modeling!

---

<div class="post-metadata">

### Author: ![TECHNOtejas](https://metastudio.org/letter_avatar_proxy/v4/letter/t/77aa72/32.png) [@TECHNOtejas](https://metastudio.org/u/TECHNOtejas)
#### Post date: [May 18, 2020, 10:39am UTC](https://metastudio.org/t/about-the-3d-design-category/3582/2 "2020-05-18T10:39:26Z")

</div>

Hii sir i am tejas from shipur and i know to make designs on printing desing software and if you are ready i will make a nameplate of your name bye #staycoool